Skip to Navigation | Skip to Main Content | Skip to Site Map

MyFloridaHouse.gov | Mobile Site

Senate Tracker: Sign Up | Login

The Florida Senate

2014 Florida Statutes

F.S. 553.793
553.793 Streamlined low-voltage alarm system installation permitting.
(1) As used in this section, the term:
(a) “Contractor” means a person who is qualified to engage in the business of electrical or alarm system contracting pursuant to a certificate or registration issued by the department under part II of chapter 489.
(b) “Low-voltage alarm system project” means a project related to the installation, maintenance, inspection, replacement, or service of a new or existing alarm system, as defined in s. 489.505, operating at low voltage, as defined in the National Electrical Code Standard 70, Current Edition, and ancillary components or equipment attached to such a system, including, but not limited to, home-automation equipment, thermostats, and video cameras.
(2) Notwithstanding any provision of law, this section applies to low-voltage alarm system projects for which a permit is required by a local enforcement agency.
(3) This section does not apply to the installation or replacement of a fire alarm if a plan review is required.
(4) A local enforcement agency shall make uniform basic permit labels available for purchase by a contractor to be used for the installation or replacement of a new or existing alarm system at a cost of not more than $55 per label per project per unit. However, a local enforcement agency charging more than $55, but less than $175, for such a permit as of January 1, 2013, may continue to charge the same amount for a uniform basic permit label until January 1, 2015. A local enforcement agency charging more than $175 for such a permit as of January 1, 2013, may charge a maximum of $175 for a uniform basic permit label until January 1, 2015.
(a) A local enforcement agency may not require a contractor, as a condition of purchasing a label, to submit information other than identification information of the licensee and proof of registration or certification as a contractor.
(b) A label is valid for 1 year after the date of purchase and may only be used within the jurisdiction of the local enforcement agency that issued the label. A contractor may purchase labels in bulk for one or more unspecified current or future projects.
(5) A contractor shall post an unused uniform basic permit label in a conspicuous place on the premises of the low-voltage alarm system project site before commencing work on the project.
(6) A contractor is not required to notify the local enforcement agency before commencing work on a low-voltage alarm system project. However, a contractor must submit a Uniform Notice of a Low-Voltage Alarm System Project as provided under subsection (7) to the local enforcement agency within 14 days after completing the project. A local enforcement agency may take disciplinary action against a contractor who fails to timely submit a Uniform Notice of a Low-Voltage Alarm System Project.
(7) The Uniform Notice of a Low-Voltage Alarm System Project may be submitted electronically or by facsimile if all submissions are signed by the owner, tenant, contractor, or authorized representative of such persons. The Uniform Notice of a Low-Voltage Alarm System Project must contain the following information:

UNIFORM NOTICE OF A LOW-VOLTAGE
ALARM SYSTEM PROJECT

Owner’s or Customer’s Name  

Owner’s or Customer’s Address  

City  

State  Zip 

Phone Number  

E-mail Address  

Contractor’s Name  

Contractor’s Address   

City  

State  Zip 

Phone Number 

Contractor’s License Number  

Date Project Completed  

Scope of Work   

Notice is hereby given that a low-voltage alarm system project has been completed at the address specified above. I certify that all of the foregoing information is true and accurate.

  (Signature of Owner, Tenant, Contractor, or Authorized Representative)  

(8) A low-voltage alarm system project may be inspected by the local enforcement agency to ensure compliance with applicable codes and standards. If a low-voltage alarm system project fails an inspection, the contractor must take corrective action as necessary to pass inspection.
(9) A municipality, county, district, or other entity of local government may not adopt or maintain in effect an ordinance or rule regarding a low-voltage alarm system project that is inconsistent with this section.
(10) A uniform basic permit label shall not be required for the subsequent maintenance, inspection, or service of an alarm system that was permitted in accordance with this section.
History.s. 2, ch. 2013-203.